Lithgow City Council
Private building certifier in Lidsdale
CertifiBuild certifies new houses, sheds, extensions, garages and granny flats in Lidsdale. Lidsdale homes are all free-standing, so zone and lot size tend to set the first design limits.
NSW 2790
Class 1 homes and Class 10 structures
Local rules
Lidsdale: houses on larger lots near Wallerawang
All detached houses
Lidsdale is a small locality in the Lithgow area. The 2021 Census counted 471 residents in 176 private dwellings, and all occupied ones were stand-alone houses. No home is attached, so projects centre on single homes, sheds and yard structures on their own blocks, and the owner usually makes every decision.
Rural or large lot rules
The Lithgow Development Control Plan 2021 splits housing controls by zone and lot size. Rural land follows the rural section, and so does R5 land where the lot passes 4,000 square metres. There, total outbuilding area can reach 300 square metres, with no single building over 150 square metres, walls up to 4.2 metres and ridges up to 6 metres. Sheds need at least 5 metres to side and rear boundaries. On smaller urban lots, lower limits apply.
Driveways and earthworks
Rural driveways must be at least 3.5 metres wide. Cut or fill deeper than one metre triggers extra supporting information.
Check the maps
Look up bush fire, mine subsidence and drinking water catchment mapping for your lot before design.
Typical work
Common projects and how they get approved
What owners build here
Lidsdale's detached homes on larger blocks lead to practical projects. Storage and outdoor space come up often. Typical jobs: Because every home is detached, nearly every job is a single owner decision.
- New houses, sited to meet rural or urban setbacks depending on zone and lot size.
- Large sheds and workshops within the cumulative floor area limits, kept 5 metres from boundaries on big lots.
- Extensions and verandahs on existing homes to add space for growing families.
- Granny flats, within the size limit set in the local plan.
- Carports and garages, with driveway width and grade set by the DCP.
How approval usually works
A CDC (complying development certificate, the fast state code route) can suit some Lidsdale houses and sheds, if the design and block both comply and no mapped hazard rules it out. Larger sheds, rural style projects or hazard affected lots often need a development application (DA) to council. Before lodging, confirm your zone and lot area, because they decide which DCP section applies. Look at the bush fire map, and if the block is shown on it, build to the assessed construction level. Find out if the block sits in a mine subsidence district and if drinking water catchment stormwater controls apply. CertifiBuild checks which DCP section governs your block before the shed or house is ordered, which saves redesigns later.
Our services
From approval to sign-off.
One certifier for your whole Lidsdale job, from the first plan check to the occupation certificate.
Local questions
Questions we hear about this suburb.
No two lots in Lidsdale are the same. Give us your address and we will check every map that affects it.
See the council pageWhat shed size is allowed on a Lidsdale large lot?
On an R5 lot whose area tops 4,000 square metres, the Lithgow Development Control Plan 2021 lets all outbuildings together cover up to 300 square metres. No single building may exceed 150 square metres, walls can rise to 4.2 metres and the ridge to 6 metres. Rural zoned land follows the same rural section. Smaller urban lots get lower limits, so confirm the zone and measure the block ahead of picking a kit. Bush fire or mine subsidence mapping may also affect the design, and a larger shed often needs a development application (DA) rather than a fast-track certificate.
What setback does a shed need from my boundary?
In the Lithgow Development Control Plan 2021 (DCP), rural-zoned sheds, and those on R5 blocks above 4,000 square metres, must keep a clear 5 metres or more to side and rear boundaries. Smaller urban lots use reduced setbacks linked to wall height and zone. Take the measurement to the wall, not the eaves. Because zone and lot area decide which section of the DCP governs, settle both before any kit is ordered. Bush fire mapping may also set the construction level. We can confirm the governing section before the slab is set out.
Do drinking water catchment rules apply in Lidsdale?
They can. Parts of the Lithgow area sit within the state’s drinking water catchment, and mapped land carries extra stormwater controls. Every Lidsdale home is free-standing, often on a larger block, so roof water, driveway runoff and wastewater treatment on the block all need thought. Look up the catchment map for your lot before drainage and wastewater plans are locked in. Check the bush fire and mine subsidence maps in the same sitting, since those layers can also shape the design and decide whether a complying development certificate (CDC) is possible.
Building in this suburb?
Send us the address first.
We check the local maps for your lot, confirm the approval path and quote in writing.